Preparation for the site: Before applying paint dust, oil, and fungus should be cleaned up from the wall. For new walls use sandpaper or stone and for old walls use the scrubber to clean up. The wall should be dried up properly before applying paint.
 
Step-1: Use 1 coat of Wallelite interior wall Sealer (water-based) and then dry it for 3 - 5 hours. If there is a chance of salt damping, then Salt Seal can be used as an undercoat.
 
Step-2: For covering different flaws and ensuring smoothness, use Puttelite Wall Putty or Multipurpose Putty, and let the wall dry for 3 - 4 hours.
 
Step-3: Apply Wall Sealer (solvent-based) or A close Sealer on the wall and keep it drying for 18 - 24 hours or 3 - 5 hours respectively. After that, clean the wall by rubbing 320 sandpaper.
 
Step-4: Thin up to 1:1 by adding clean tap water with Rebellite. For smooth finishing 2 coats of paint can be applied. An extra 1 coat of paint can be used for the deep shed. Per litre 120 - 130 sqft place can be painted.
 
Special Note: Stir well before use. The application should be processed with a clean brush and roller. It’s better not to use chalk powder for accurate color. Tightly close the jar lip after every use so that air does not enter. Clean all equipment with water immediately after use.