Victory-U Anti Corrosive Red Oxide Primer

Victory-U Anti-Corrosive Red Oxide Primer is a general-purpose primer based on modified alkyd resin. It has excellent anti-corrosion properties. It is used in steel and iron structures.
 
Preparation for the site: Before applying paint, Use 120 emery paper to remove dust, and oil from the wall, and clean up the surface. The surface should be dried up properly before applying paint to cure.
 
Step-1: Thin up to 10-15% by adding thinner with Victory-U Anti-Corrosive Red Oxide Primer. After applying it to the surface. It will take 18-24 hours to get the surface dried up. Victory-U Anti-Corrosive Red Oxide Primers are applicable for both the interior and exterior of steel and iron structures. Per liter, coverage is about 138 ft - 179 ft.
 
Step 2: For a smoother finish, an Extra 1 coat of Victory-U Anti-Corrosive Red Oxide Primer can be applied.
 
Special Note: Stir the paint well before using. Use a clean brush and spray for proper application. Tightly close the lid after every use so that air does not harm the paint. Clean the brush and all other equipment with thinner immediately after use.