Preparation for the site: Before applying paint, dust, chalk, stoop, oil, and fungus should be cleaned up properly. Remove all types of separated and micro dirt from the wall. It is not necessary to use any kind of sealer or primer for a new wall. For a new wall, use 120 sandpaper or stone and for the old wall, use a scraper to clean up. For Old wall, Elitecem is used only on the cemented wall. Elitecem is not necessary to use for emulsion based painted walls because of its self-curing formula. Wall should be dried up properly before applying paint to cure. For newly plastered wall, give about 12 weeks for curing.
Step-1: For being a self-curing formula in Supreme Elitecem (Walter based), use cement: water = 2:1 (as per volume), that means, Mix 2 parts of self-curing paint with 1 part clean water perfectly for making a paste. Before applying on the wall, 1 part of clean water is mixed with formed thin paste again and, dried up for 3-4 hours which is applicable for both interior and exterior walls. Per liter coverage is about 80 – 90 ft. It must be used within 1 hour after mixing water. Otherwise, Frozen paint or paste may be applicable for unused.
Read More Download Product Datasheet
Preparation for the site: Before applying paint, dust, chalk, stoop, oil, and fungus should be cleaned up properly. Remove all types of separated and micro dirt from the wall. It is not necessary to use any kind of sealer or primer for a new wall. For a new wall, use 120 sandpaper or stone and for the old wall, use a scraper to clean up. For the old wall, Elitecem is used only on the cemented wall. Elitecem is not necessary to use for emulsion-based painted walls because of its self-curing formula. The wall should be dried up properly before applying paint to cure it. For newly plastered walls, give about 12 weeks for curing.
Step-1: For a self-curing formula in Supreme Elitecem (Walter-based), use cement: water = 2:1 (as per volume), that means, Mix 2 parts of self-curing paint with 1 part of clean water perfectly for making a paste. Before applying on the wall, 1 part of clean water is mixed with the formed thin paste again and, dried up for 3-4 hours which is applicable for both interior and exterior walls. Per litre, coverage is about 80 – 90 sqft. It must be used within 1 hour after mixing water. Otherwise, Frozen paint or paste may be applicable for unused.
Step-2: For covering different flaws and ensuring smoothness, use Multipurpose Putty. It will take 3 - 4 hours to get the wall dried up. After that, smoothen the wall by using 220 Sandpaper.
Step-3: For a smoother finish, an Extra 1 coat of supreme Elitecem can be used after using Multipurpose Putty. It will take 3 - 4 hours to get the wall dried up completely.
Special Note: Before applying Elitecem, the wall must be cleaned up with clean water. Use self-curing supreme Elitecem for 1 coat by using a brush (as per guideline). Tightly close the lid after every use so that air does not harm the paint. Clean all equipment with water immediately after use. It is not necessary to use the additional water before drying to make the wall stronger after using self-curing Supreme Elitecem. As a result, it is economical for both water and time. It gives more coverage than existing other similar products. It is hugely economical and consists of a special polymer, so it is easier to use on walls than other existing cement paint.