Plastelite Wall Sealler

Preparation for the site: Before applying paint, dust, oil, and separated micro dirt or objects should be cleaned up properly from the wall. For old walls, use a scrapper or soap to clean up. The wall should be dried up properly before applying paint to cure.
 
Step 1: Thin up to 10% - 15% by adding GP Thinner with Plastelite Wall Sealer (Solvent-Based). After applying it on the wall it will take 18-24 hours to get the wall dried up. Plastelite Wall Sealer (Solvent-Based) is applicable for both interior and exterior walls. Per liter, coverage is about 90 sqft - 100 sqft. It is applicable only for properly dried walls.
 
Step 2: For covering different flaws or imperfections and ensuring smoothness, use Puttelite Wall Putty or Multipurpose Putty. It will take 3 - 4 hours or 10 - 12 hours to get the wall dried up. Then, use light sanding paper to clean up the wall for smoothening.
 
Step 3: For a smoother finish, an Extra 1 coat of Plastelite Wall Sealer (Solvent-Based) can be used after using wall putty.
 
Special Note: Stir the paint well before using. Use a clean brush and roller for proper application. Tightly close the lid after every use so that air does not harm the paint. Clean all equipment with water immediately after use.