Preparation for the site: Before applying paint, dust, oil, and fungus should be cleaned up properly from the wall of the building. For a new wall, use sandpaper or stone and for the old wall, use a scraper or soap to clean up. The wall should be dried up properly before applying paint to cure.
 
Step-1: Thin up to 1:1 by adding clean water with A closed Sealer. After applying it on the wall it will take 2-3 hours to get the wall dried up. A close sealer is applicable for both interior and exterior walls. Per litre, coverage is about 170 ft - 180 ft. If there is a chance of salt, then Salt Seal can be applied as an undercoat.
 
Step-2: For covering different flaws or imperfections and ensuring smoothness, use Puttelite Wall Putty or Multipurpose Putty. It will take 3 - 4 hours or 10 - 12 hours to get the wall dried up.
 
Step-3: For a smoother finish, Extra 1 coat Aclose Sealer can be used after using wall putty.
 
Special Note: Stir the paint well before using. Use a clean brush and roller for proper application. Tightly close the lid after every use so that air does not harm the paint. Clean all equipment with water immediately after use.